EWP®115 Nylon Kit Remote Electric Water Pump (12V) (Part #8025)
The EWP®115 Nylon Electric Water Pump is designed to deliver 115 litres per minute of coolant flow. It is suitable for small, medium, large, high-performance, and 4WD vehicles. This pump enhances engine cooling control, capacity, power, torque, and fuel efficiency.
The EWP®115 is a practical alternative to mechanical belt-driven pumps, which sap engine power. Hardwired into your electrical system, it bypasses the engine, freeing up to an additional 10kW (13hp). It is also widely used in intercooler applications.
KIT CONTENTS
Part Description
Units
EWP®115 Nylon 12V
1
EWP® Basic Wiring Harness
1
Hose Clamps
2
Red Wire Joiner
1
Red 6mm Ring Terminal
1
Relay - 12V 40 Amp 5 Pin with Resistor Protection
1
Screw - Self Tap 8x3/8 BZ
1
TECHNICAL SPECIFICATIONS
Voltage
12 Volt Pump
Operating Voltage
3V DC to 15V DC
Maximum Current
10A @ 13V
Flow Rate (Max)
139 L/min (36.7 US gal/min) @ 13V DC
Operating Temp.
-40°C to 120°C (-40°F to 248°F)
Pump Design
Clockwise centrifugal with volute chamber
Pump Weight
920 grams (2.03 lbs)
Pump Material
Nylon 66 - 30% Glass-Filled
Burst Pressure
500 kPa (72.5 PSI)
Seal
Ceramic Face Seal
Self-Priming
No
Fits Hose Sizes
35mm to 51mm (1?" to 2")
Push-On Fitting Size
38mm Inlet & Outlet (Options: 44mm with 3mm Sleeve #8510, 51mm with 6mm Sleeve #8511)
EWP & Controller Installation Demonstration
$246.88Purchase directly from our trusted partner VPW. Buy Now on VPW
