STREET PRO GAS TANK 23' TUNNEL CUS FOR +5'BACKBONE, O OR -2' DOWNTUBE, U/W 82/L* GAS CAP
$594
- Condition
- New
Description
- Designed for "Long and Low" type frames with 5" backbone stretch and 0 or -2" downtube stretch.
- 23" long, 2 1/2" wide tunnel.
- Crossover provision for 10mm (3/8-24) banjo fittings located at the front of the tank.
- 22mm petcock bung is on the left side near the front of the tank.
- Weld-to-frame brackets recess in the bottom of the tank for a hidden look.
- Mounting brackets are rubber isolated to prevent vibration cracks.
- See below for availability of gas caps.
Reference: JPFD5120948
Similar listings you might like
-
lincoln carburetor motorcraft 4300 -
markiii nsw number plates -
proflow aluminium straight hose end hose end -08an for ptfe, black -
proflow fuel cell, tank, sumped, 15gal (57l), aluminium, natural 510 x 460 x 260mm, with sender two -10 an female outlets -
proflow hose tubing air intake, silicone, reducer, 3.00in. - 3.50in. straight, blue -
proform , chevy oil pump primer w/ bushing , fits chevy v8 and v6 90 degree engines -
weld wheel, drag rear, v-series, 15x10 size, 5x4.5 bolt pattern, 4 backspace, black center, polished shell, each -
wheel lug nut kit black, street pro 007 dome head, length 1.70, m12 x 1.5, 1.00 inch shank, set of 10 -
proflow cylinder head supermax 210 & intake kit, manifold, max jr, single plane, aluminium, black, square bore, sb for ford, 289, 302w, kit -
proflow cylinder head airmax 185 & intake kit, manifold, airmax, dual plane, aluminium, natural, square bore, for ford, 289/302, each -
proflow valve cover gasket, rocker cover, blue silicone for ford falcon 6 cyl ba / bf 4.0l barra, set -
rts driveshaft, tailshaft, 3.0 inch aluminium, custom length, 1350 transmission yoke, 1350 diff, spicer hd u-joints, balanced - made to order